Transcript of the HEATKEEPER Radiator Panels fitting instructions video

Welcome to the warm, comfortable world of HEATKEEPER Energy Saving Radiator Panels. In the next few minutes I would like to explain how these panels can save you money and add value to your home. I will also show how easy they are to fit. In a single weekend you can achieve cost-savings and comfort that can last a generation.

Households are facing dramatic year-on-year increases in their fuel bills.

At the same time our planet is under increasing threat from the use of fossil fuels and global warming. Many people feel a sense of helplessness as to what they personally can do to avoid this.

One action we can all take is to save as much energy in our own homes as possible.

Now the energy-saving company Joulesave Limited has come up with a cost-effective way to save energy consumed by your heating system by installing HEATKEEPER Energy Saving Radiator Panels behind all the radiators in your home.

The panels are long-lasting, simple to fit and do not require the removal of the radiator. They come supplied with easy-to-follow fitting instructions & a generous supply of self-adhesive tape.

In a typical home the installation of HEATKEEPER Radiator Panels will save as much as £20 out of every £100 you spend on heating your home.

Independent trials carried out by world renowned bodies show you can recover the money you spend on the panels in less than one heating season.

Apart from being long-lasting HEATKEEPER Radiator Panels are stylish in appearance and, as permanent energy-saving fixtures, can even add value to your home.

In addition to saving energy, HEATKEEPER Radiator Panels improve heat circulation in the room and help eliminate cold spots. So wherever you are sitting in the room you will experience the same, warm, comfortable feeling.

HEATKEEPER Energy Saving Radiator Panels are suitable for the height of the most common household radiator. It takes 2-2½ panels for a typical radiator.

With its special saw-tooth, metalized design, the panel works in several ways to save energy & central heating costs and to create a more comfortable distribution of heat in the room.

In a typical centrally heated room, much heat is lost into the wall behind and above the radiator before gathering at ceiling level where further heat losses into the fabric of the building occur. The metalization of the panels reflects infra red heat back into the radiator so the water returns to the boiler which therefore triggers less often.

The special saw-tooth, metalized design of the HEATKEEPER Panels cause the warm air to spin out into the room, reducing the time it takes to heat up the room and virtually eliminating cold spots.

Fitting the panels is a clean fast and simple job for those with a little DIY experience – IT IS NOT NECESSARY TO REMOVE THE RADIATOR. In a nutshell here’s how it’s done:

  1. Use the tape supplied to fit the panels to FLAT surfaces behind the radiators.
  2. Make sure the surface behind the radiator is clean and free from dust prior to fitting. This is essential to ensure the tape sticks properly. Use a feather duster to remove dust and dirt.
  3. The only other tools you will need to do the job are a pair of scissors, a tape measure and a length of ordinary garden cane.
  4. No matter how your radiator is fixed to the wall you should find that the method described in the Fitting Instructions supplied with the panels is easy to adapt to your needs.
  5. The HEATKEEPER brand name should be in the top left hand side facing away from the wall.
  6. First of all you measure the radiator height to establish the correct combinations of horizontal panel sections to be used for that particular radiator height.
  7. The Fitting Instructions supplied with the panels provide the necessary information about how you select the correct combinations of horizontal panel sections for the height of the radiator to be fitted.
  8. Next you cut the panel to the correct height of your radiator. The panels have three horizontal breaks, which divide the panel into four horizontal sections. You simply cut with scissors along the horizontal lines to adapt the panels to the height of your radiators.
  9. Apply the double-sided tape enclosed to all four outside edges, and the three vertical struts.
  10. Remove the backing paper on the tape…. and fit the panel just below the top of the radiator.
  11. The tape on the panel top is stuck to the wall by running a finger along the top edge.
  12. The bottom edge is similarly secured by putting the hand under the radiator, and running a finger along the bottom edge.
  13. Then, using the garden cane, push the vertical edges and struts to the wall.
  14. To complete the job you fit additional panels alongside the first panel until close to the right hand bracket.
  15. Now sit back, relax and enjoy the additional comfort and cost savings that new HEATKEEPER Energy Saving Radiator Panels bring.
  16. For more information pay a visit to our website at www.heatkeeper.co.uk where you can also purchase HEATKEEPER Energy Saving Radiator Panels securely online.